THERMOR General-catalogue 2021-2022

Air output Expansion valve Compressor Hot water outlet Exchanger Cold water inlet Working principles: The Aeromax Swimming Pool 2 uses ambient air to heat the pool. The refrigerant fluid inside Aeromax Swimming Pool goes through a thermodynamic cycle allowing it to transfer thermal energy from ambient air to the swimming pool water. 1 The fan sends air flow into the evaporator. Through the evaporator, the refrigerant fluid warms up and evaporates. 2 The compressor increases the pressure the vapors of the refrigerant fluid, increasing its temperature. 3 This heat is conveyed through the titanium exchanger. 4 The refrigerant fluid goes through an expansion valve, cools off and condenses back to its liquid form. REVERSIBLE HEAT PUMP TECHNOLOGY RELIABLE ENERGY-SAVING SOLUTION FOR HEATING OR COOLING SWIMMING POOLS Renewable energy solutions RENEWABLE, CLEAN AND FREE CALORIES CONTAINED IN AMBIENT AIR ARE AN IDEAL ENERGY SOURCE TO HEAT WATER. THIS SOLUTION CAN PERFORM EVEN AT NIGHT AND IN HAIL OR RAINY CONDITIONS. Working principles: The fan 1 inhales ambient air transferring its energy to the refrigerant fluid in the evaporator 2 thus changing its state from liquid to gas. The gas is further heated by compression 3 . In the condenser 4 the gas transfers its accumulated heat to the water tank. As it gets colder it transforms back to fluid. The pressure of the fluid is further reduced by the expansion valve 5 . The electric back-up heating 6 starts only when required during insufficient heat pump working conditions. HEAT PUMP WATER HEATER TECHNOLOGY SMART ENERGY-SAVING SOLUTION FOR ALL CLIMATE CONDITIONS Evaporator Expansion valve Fan Cooled air Ambient air Compressor Electric back-up heating (option) Condenser To overcome the challenge of limited traditional natural resources, their rising prices and ecological pollution, Thermor has developed products that can operate on renewable energy such as our heat pump water heater, and heat pump for swimming pools. 1 2 3 4 5 6 4 1 3 2 100